vbus05b1-sd0 www.vishay.com vishay semiconductors rev. 1.2, 28-aug-15 1 document number: 85899 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 ultra low capacitance bidirectiona l symmetrical (bisy) single line esd-protection diode in silicon package marking (example only) 1 = year code ? open circle = month code and pin 1 ? xy = type code features ? ultra compact clp0603 package ? low package height < 0.3 mm ? 1-line esd-protection ? working range 5.5 v ? low leakage current < 0.1 a ? ultra low load capacitance c d = 0.29 pf typ. ? esd-protection acc. iec 61000-4-2 ? 16 kv contact discharge ? 16 kv air discharge ? lead plating: au (e4) ? lead material: ni ? backside coating ? material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912 ? ? ? ? 0.3 0.27 0.6 22544 22543 xy 1 22454 ordering information device name ordering code taped units per reel (8 mm tape on 7" reel) minimum order quantity vbus05b1-sd0 VBUS05B1-SD0-G4-08 15 000 15 000 package data device name package name type code weight soldering conditions vbus05b1-sd0 clp0603 5a 0.12 mg 260 c/10 s at terminals reflow soldering according jedec ? std-020 absolute maximum ratings parameter test conditions symbol value unit peak pulse current acc. iec 61000-4-5, 8/20 s/single shot i ppm 2.5 a peak pulse power pin 1 to pin 2 acc. iec 61000-4-5; t p = 8/20 s; single shot p pp 45 w esd immunity contact discharge acc. iec 61000-4-2; 10 pulses v esd 16 kv air discharge acc. iec 61000-4-2; 10 pulses 16 operating temperature junction temperature t j -55 to +150 c storage temperature t stg -55 to +150 c
vbus05b1-sd0 www.vishay.com vishay semiconductors rev. 1.2, 28-aug-15 2 document number: 85899 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 esd-protection for high-speed signal or data lines the vbus05b1-sd0 is a bidirectional and symmetrical (bisy) esd-protection device which cl amps positive and negative overvoltage transients to ground. connected between the signal or data line and the ground the vbus05b1-sd0 offers a high isolation (low leakage current, low capacitance) within the specified working range. due to the short leads and small package size of the tiny clp0603 package the line inductance is very low, so that fast transients like and esd-strike can be clamped with minimal over- or undershoots. due to the very low capaci tance the vbus05b1-sd0 can be used for high speed data ports like hdmi, usb 3.0 or thunderbolt. ? electrical characteristics (t amb = 25 c, unless otherwise specified) parameter test conditions/remarks symbol min. typ. max. unit protection paths number of li nes which can be protected n channel - - 1 lines reverse stand-off voltage max. reverse working voltage v rwm --5.5v reverse voltage at i r = 0.1 a v r 5.5 - - v reverse current at v rwm = 5.5 v i r --0.1a reverse breakdown voltage at i r = 1 ma v br 6.0 8.5 10 v reverse clamping voltage at i pp = 1 a v c -1214v at i pp = i ppm = 2.5 a v c -1518v capacitance at v r = 0 v; f = 1 mhz c d - 0.29 0.4 pf at v r = 3.3 v; f = 1 mhz c d -0.29- pf clamping voltage transmission line pulse (tlp); t p = 100 ns i tlp = 8 a v c-tlp -20- v transmission line pulse (tlp); t p = 100 ns i tlp = 16 a -29- dynamic resistance transmission line pulse (tlp); t p = 100 ns r dyn -1.14- ?
vbus05b1-sd0 www.vishay.com vishay semiconductors rev. 1.2, 28-aug-15 3 document number: 85899 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 typical characteristics (t amb = 25 c, unless otherwise specified) fig. 1 - esd discharge current wave form acc. iec 61000-4-2 (330 ? /150 pf) fig. 2 - 8/20 s peak pulse current wave form acc. iec 61000-4-5 fig. 3 - typical reverse voltage v r vs. reverse current i r fig. 4 - typical peak clamping voltage v c vs. peak pulse current i pp fig. 5 - typical peak clamping voltage v c vs. peak pulse current i pp 0 % 20 % 40 % 60 % 80 % 100 % 120 % -10 0 102030405060708090100 time (ns) discharge current i esd rise time = 0.7 ns to 1 ns 53 % 27 % 20557 0 % 20 % 40 % 60 % 80 % 100 % 010203040 time (s) i ppm 20 s to 50 % 8 s to 100 % 20548 0 1 2 3 4 5 6 7 8 9 10 1e-09 1e-08 1e-07 1e-06 1e-05 1e-04 1e-03 v r in (v) 22749 i r in a 0 2 4 6 8 10 12 14 16 18 01234 mea s ured acc. iec 61000-4-5 (8/20 s - wave form) i pp in a v c in v 22750 0 5 10 15 20 25 30 35 40 45 0 5 10 15 20 25 tran s mi ss ion line pul s e (tlp) t p = 100 n s (average between 55 n s and 95 n s ) v c = 1.14 v/a x i pp + 10 v i pp in a v c in v 22755
vbus05b1-sd0 www.vishay.com vishay semiconductors rev. 1.2, 28-aug-15 4 document number: 85899 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 package dimensions in millimeters (mils): clp0603-2l ? footprint and solder ing recommendation: ? please see application note: www.vishay.com/doc?85917 a1 e b a d l e1 e package = chip dimen s ion s in mm millimeter s a a1 b d e e min. nom. max. min. nom. max. 0.24 0.22 0.27 0.57 0.27 0.25 0.30 0.60 0.40 0.30 0.02 0.28 0.33 0.63 mil s 9.44 8.66 10.62 22.44 10.63 9.84 11.81 23.62 15.75 11.81 0.79 11.02 12.99 24.80 l 0.12 0.15 0.18 4.72 5.91 7.09 e1 0.25 9.84 created - date: 22. nov. 2010 document no.: s 8-v-3906.04-023 (4) 2 terminal leadle ss package (clp0603-2l llp) rev.4 - date: 07. may 2014 22740
vbus05b1-sd0 www.vishay.com vishay semiconductors rev. 1.2, 28-aug-15 5 document number: 85899 for technical questions, contact: esdprotection@vishay.com this document is subject to change without notice. the products described herein and this document are subject to specific disclaimers, set forth at www.vishay.com/doc?91000 carrier tape in millimeters: clp0603 orientation in carrier clp0603 a a-a s ection a 4 0.1 2 0.05 1.75 0.1 b b 8 + 0.3 - 0.1 b-b s ection 0.37 0.03 0.67 0.03 5 max. 2 0.33 0.03 0.2 0.02 ? 0.2 0.05 ? 1.55 0.05 3.5 0.05 cummulative tolerance s of 10 s procket hole s i s +/-0.2mm 22591 document no. s 8-v-3906.04-0025 (4) created - date: 22. nov. 2010 clp0603 top view unreeling direction pin 1 a detail a 50:1 22607 orientation in carrier tape (clp0603) s 8-v-3906.04-026 (4) 22.10.2010
legal disclaimer notice www.vishay.com vishay revision: 02-oct-12 1 document number: 91000 disclaimer all product, product specifications and data are subject to change without notice to improve reliability, function or design or otherwise. vishay intertechnology, inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, vishay), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any o ther disclosure relating to any product. vishay makes no warranty, repres entation or guarantee regarding the suitabilit y of the products for any particular purpose or the continuing production of any product. to the maximum extent permitted by applicable law, vi shay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all i mplied warranties, including warra nties of fitness for particular purpose, non-infringement and merchantability. statements regarding the suitability of products for certain type s of applications are based on vishays knowledge of typical requirements that are often placed on vishay products in generic applications. such statements are not binding statements about the suitability of products for a particular application. it is the customers responsib ility to validate that a particu lar product with the properties descri bed in the product specification is suitable fo r use in a particular application. parameters provided in datasheets and/or specification s may vary in different applications an d performance may vary over time. all operating parameters, including typical pa rameters, must be validated for each customer application by the customers technical experts. product specifications do not expand or otherwise modify vish ays terms and condit ions of purchase, including but not limited to the warranty expressed therein. except as expressly indicate d in writing, vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the vi shay product could result in personal injury or death. customers using or selling vishay products not expressly indicated for use in such applications do so at their own risk. pleas e contact authorized vishay personnel to ob tain written terms and conditions regarding products designed for such applications. no license, express or implied, by estoppel or otherwise, to any intellectual prope rty rights is granted by this document or by any conduct of vishay. product names and markings noted herein may be trad emarks of their respective owners. material category policy vishay intertechnology, inc. hereby certi fies that all its products that are id entified as rohs-compliant fulfill the definitions and restrictions defined under directive 2011/65/eu of the euro pean parliament and of the council of june 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (eee) - recast, unless otherwis e specified as non-compliant. please note that some vishay documentation may still make reference to rohs directive 2002/95/ ec. we confirm that all the products identified as being compliant to directive 2002 /95/ec conform to directive 2011/65/eu. vishay intertechnology, inc. hereby certifi es that all its products that are identified as ha logen-free follow halogen-free requirements as per jedec js709a stan dards. please note that some vishay documentation may still make reference to the iec 61249-2-21 definition. we co nfirm that all the products identified as being compliant to iec 61249-2-21 conform to jedec js709a standards.
|
